-
διαφανές HT οδοντικό Zirconia 98x10mm 43% κενό
High Translucent HT Dental Zirconia Blank Compatible For Wieland Zirkonzahn Amann Girrbach dental zirconia blocks features 1. Natural color. Compared with the color of traditional porcelain teeth, the color of zirconia porcelain teeth is naturally smooth, realistic in appearance and strong in transparency. 2. Good biocompatibility. It has no irritation, no allergic reaction to the gums, and no black line of the gums is formed. It is very suitable for oral cavity and avoids
-
HT υψηλής αντοχής CAM 1350 CAD οδοντικός Zirconia δίσκος MPA
HT Plus 1350Mpa High Stregnth CAD CAM Dental Zirconia Block For Dental Laboratory Dental zirconia blocks YUCERA zirconia block is made from the finest and most pure zirconia ceramics powder with Cold Isostatic Pressed(CIP). Our zirconia block is a partially sintered 3mol% yttria (Y2O3) stabilized zirconia (ZrO2) block, which is made from zirconia ceramics powder by cold isostatic pressing and machining. It is more homogeneous than uniaxial pressed. After fully densified, the
-
CAM CAD που αλέθει 1530 τον οδοντικό Zirconia δίσκο ℃ 1350Mpa
YUCERA 1350Mpa High Strength Zirconia HT Plus High Strength CAD CAM Milling Block 1. White Zirconia ( HS/HT/HT plus/ST/SHT/ST plus/UT ) 2. Preshaded Zirconia ( HTC/STC/UTC) 3. Multilayer Zirconia ( STML/UTML/HC4D/UTML-2H ) This Page is about White Zirconia HT plus -- For coping and Framework 39% transluency, 1350Mpa high strength, 1530C Sintering YUCERA zirconia has quite high cost performance both in quality and prices. The following is the size available for different
-
HT συν 6.07g/cm ³ 98x16mm οδοντικός δίσκος Zirconia για τη μηχανή άλεσης
YUCERA Dental CAD CAM Dental Zirconia Disc Dental Milling Center HT 98mm Zirconia Dental CAD CAM Zirconia Blocks HT plus 98mm Zirconia For Dental Milling Center YUCERA is a professional manufacturer for CADCAM dental zirconia with various grades. 1. White Zirconia (HT/STUT ) 2. Preshaded Zirconia (STC/) 3. Multilayer Zirconia ( STML/UTML/3DMUL ) According to our market understanding, our zirconia has quite high cost performance both in quality and prices. The following is the
-
1200MPA 98mm 95mm οδοντικός δίσκος Zirconia για το σύστημα μηχανών Yenadent
1200MPA 98mm 95mm Dental Zirconia Disc For Yenadent Machine System Mililng Zirconia High Translucency Zirconia For Yenadent Machine System Instructions for use Honchon zirconia High translucent Zirconia YUCERA HT (high translucent) can be used for coping crown and framework. The following instructions provide general guidelines for designing, milling, coloring, sintering, porcelaining and glazing and should be followed very carefully to avoid any loss of aesthetics, fit,
-
Οδοντικό κενό ζιρκονίου άλεσης 1200MPA CAM CAD CE για το σύστημα D98
CE CAD CAM Milling 1200MPA Dental Zirconium Blank For D98 System Open System White Dental Zirconia Puck For Dental Lab Milling Machine Our team and service Now we have experienced R & D department and international sales department. Our dental material are 100% carefully inspected under ISO certified quality system. Our products are also under CE and FDA certificate. Our advantages and hot sales dental material as all cadcam dental zirconia ,milling tools, pmma, wax ects.
-
UT άσπρα 800 κενά εκκέντρων CAD δίσκων MPA οδοντικά Zirconia εξαιρετικά διαφανή
UT White 800 MPa Dental Zirconia Disc Ultra Translucent Cad Cam Blanks YUCERA UT White Cad Cam Blanks Ultra Translucent High Flexural Strength UT Zirconia Block * Ultra translucent* Suitable for veneer, coping and bridge Indications Inlay, Onlay, 2-3 unit Bridges,Anterior, Crown, Veneer Physical CharacteristicsPhysical CharacteristicsSintered density 6.05±0.01g/cm³Bending Strength 800 MPaTransmittance 49%Hardness 1350HVSintering temperature 1430~1500℃/recommend 1450℃ Zirconia
-
49% εξαιρετικά διαφανής οδοντικός Zirconia φραγμός 98mm UT για προηγούμενο
49% Ultra Translucent 98mm UT Dental Zirconia Block For Anterior CAD CAM 49% Ultra Translucent Zirconia UT Dental Zirconia Block For Anterior Available System : Open CAD CAM system Zirkonzahn CAD CAM system Amann Girrbach CAD CAM system Sintering Sintering: Max Heating rate:10℃ per minute; Final temperature:1450 degree Dental Zirconia Block; Holding time at final temperature:2 hours; Cooling should be done without temperature control in closed furnace; Never open the furnace
